Tweet

The first locally branded Smartphone running Android 4.4 Kitkat  'Cherry Mobile Urban'.

The phone runs on the Android operating system, which is the most widely used mobile platform on Earth. It runs on Android 4.4, which is named KitKat, and it's the newest version of Android available.

Cherry Mobile Urban price: P4,699

Cherry Mobile Urban specs:

OS Android 4.4 Kitkat
1.3GHz Quad Core Mediatek MT6582 processor
1GB RAM
4GB internal storage expandable via MicroSD
4.5-inch qHD IPS LCD display (960 x 540 pixels) 245 ppi
8 megapixel rear facing camera with autofocus and LED flash
2 megapixel front facing camera
Dual SIM, Dual Standby, 3G (HSDPA/CDMA)
HSPA+, WiFi, WiFi hotspot, Bluetooth 4.0
GPS, A-GPS
FM Receiver, Micro USB
Motion Sensor, Proximity Sensor, Ambient Light Sensor

Cherry Mobile Urban Price and Specs

Tweet

Looking for Samsung Mobile Secrect Codes and Tips, You can try this in case you downloaded corrupted or incompatible Java midlets or other media, which are causing problems with the phone.

*2767*JAVA# Java Reset and (Deletes all Java Midlets)
*2767*MEDIA# Reset Media (Deletes All Sounds and Pics)
*2767*WAP# Wap Reset
*2767*CUST# Reset Custom EEPR0M
*2767*FULL# Reset Full EEPR0M (Caution)
For example : *2767*JAVA# would be keyed in as *2767*5282#
Note : Not all codes will work with SGH-C100.

Other Samsung Codes

*#06# IMEI code
*#9998*4357# Help Menu
*#9998*5282# Java menu (GRPS/CSD settings for JAVA server)
*#9999#0# Monitor Mode
*#9999# or *#9998*9999# Software Version
*#8888# or *#9998*8888# Hardware Version
*#9998*746# or *#9998*0746# or *#0746# Sim Infos
*#9998*523# or *#9998*0523# or *#0523# Display Contrast
*#9998*842# or *#9998*0842# or *#0842# Vibration On (until you push OK)
*#9998*289# or *#9998*0289# or *#0289# Buzzer On (until you push OK)
*#9998*288# or *#9998*0288# or *#0288# Battery & Field Infos
*#9998*377# or *#9998*0377# Error log
*#9998*778# or *#9998*0778# or *#0778# Sim Service table
*#9998*782# show date and alarm clock
*#8999*638# show network information
*#9998*5646# change operator logo at startup
*#9998*76# production number
*#9998*968# view melody for alarm
*#9998*585# Non-Volatile Memory (NVM)
*#3243948# Digital Audio Interference Off
*#32436837# Digital Audio Interference On

SAMSUNG T100 SECRET CODES

*#06# -> Show IMEI
*#9999# -> Show Software Version
*#0001# -> Show Serial Parameters

*2767*3855# -> Full EEPROM Reset ( THIS CODE REMOVES SP-LOCK!!!! but also change IMEI to 447967-89-400044-0, you must use CHGIMEI to restore it)

*2767*2878# -> Custom EEEPROM Reset
*#8999*228# -> Battery status (capacity, voltage, temperature)
*#8999*246# -> Program status
*#8999*289# -> Change Alarm Buzzer Frequency
*#8999*324# -> Debug screens
*#8999*364# -> Watchdog
*#8999*377# -> EEPROM Error Stack
*#8999*427# -> Trace Watchdog
*#8999*523# -> Change LCD contrast
*#8999*544# -> Jig detect
*#8999*636# -> Memory status
*#8999*746# -> SIM File Size
*#8999*778# -> SIM Service Table
*#8999*785# -> RTK (Run Time Kernel) errors
*#8999*786# -> Run, Last UP, Last DOWN
*#8999*837# -> Software Version
*#8999*842# -> Test Vibrator
*#8999*862# -> Vocoder Reg
*#8999*872# -> Diag
*#8999*947# -> Reset On Fatal Error
*#8999*999# -> Last/Chk
*#8999*9266# -> Yann debug screen (=Debug Screens?)
*#8999*9999# -> Software version

SAMSUNG V200 SECRET CODES

v200 Unlock Code-> *2767*7822573738#
*#9324# Netmon (press the hangup key to exit)
*#9998*JAVA# Edit GPRS/ CSD settings (S100 Only)
*#9998*Help# Help screen/ List of codes
*#9998*LOGO# Change operator Logo
*#9998*RTC# RTC Display
*#9998*Bat# Battery Status
*#9998*Buz# Turns Buzzer ON
*#9998*Vib# Turns Vibrator ON
*#9998*LCD# LCD Contrast
*#9998*9999# Softwre Version
*#9998*8888# Hardware Version
*#9998*377# NVM Error Log (?????)
*#9998*NET# SIM Network ID
*#9998*778# SIM Serv. Table
*#9998*SIM# SIM Info
*#9998*PN# Production No.
*#9998*968# Reminder Tune
*#9998*NVM# Displays Non-Volitile Memory Status
*#9999*C# ???????????????????
*#06# Displays phones I**I No.
***/// ***/// NOTE /// *** RED COLOR , they appear serious !!! Use at
own risk !!!
*#9998*2576# Forces SIM Error
*#9998*DEAD# Forces Phone Crash
*2767*MEDIA# Resets the medis on the phone (deletes all downloaded
pics/tones)
*2767*FULL# Resets the EEPRON *DANGEROUS*
*2767*CUST# Resets the Custom EEPRON
*2767*JAVA# Resets JAV downloads (deletes all downloaded midlits)
*2767*STACKRESET# Resets Stack
*2767*225RESET# ????????????????? * Dangerous *
*2767*WAP# Resets WAP Setting & Deletes Favorites

SAMSUNG A800 SECRET CODES

The universal unlock code is *2767*637# do this with out your sim in By default, the firmware (software) for x600 only receives java apps and other applications like stuff by serial port.
but even for it, you have to enable the serial port, which also causes the closing of all other ports, even the IrDA too well, guess what, i have very good news for you, do you know, you can increase the sound level, the sound level for tones, speaker fone, etc, can be increase even then if it is at max (level 4) you still can do it, just follows the instructions! 

Enter the following code:
*#8999*8378#
(You'll be shown menu, then ...)
then go to:
"H/W test"
then go to:
"Audio Settings"

then go to:
"Melody Gain"

There will you see a number. there are five (5) Melody Levels" of it. (and currently, you are at level 1 and after pressing the "save" button, you will move to level 2 and so on.

you have to change the values of all the levels and as the resultant, it will give increase the melody sound!, your tones will more louder, even more louder then the max. ringing volume.
the level wise numbers.

Melody Level 1: 13
Melody Level 2: 17
Melody Level 3: 18
Melody Level 4: 25
Melody Level 5: 31

you even can make your own combinations of level wise sounding numbers that can change the sound level. 

if anything goes wrong, then you can apply the master reset code, that will NOT delete anything, ANYTHING from your cell fone, but set each and eveything to its default/standard setting likes, factory settings. the master reset code is: #*7728#

The code: *#8999*8378#  will tell you each and everything about your cellphone and in the "H/W test", there are lot of other Audio settings, each of them having five (5) levels, you can change the combination, but before doing anything, do write the default number sequence to some place so that you'll be then able to invert it again! .. 

#*2558# - Time ON
#*2527# - GPRS Switching Set to class {4/8/9/10}
#*4263# - Handsfree Mode: ACTIVATED
#*53696# - [Java dnload] WAPSAR mode
#*536961# - WAPSAR enable HTTP disable
#*536962# - HTTP enable WAPSAR disable
#*536963# - SERIAL enable Others disable
#*5663351# - [Phone Model] SAMSUNG SGH-X100
#*6420# - Mic off
#*6421# - Mic on
#*7632# - Sleep mode
*#8999*523# - Main LCD Brightness
*#8999*3825523# - (?) External display
*2767*3855# - Full EEPROM reset(Reset all type of locks)also you'll
lose pictures and java not melody
Remove camera sound:
On main screen type:
*#8999*8378# --> Test mode
H/W test
Audio Settings
Melody Gain
Then replace 6 by 0, it'll show 12 but it's OK
Press back until main screen
Then press key volume to minimum and let's try !!! no more sound
tip by C-Quest

*2767*688# resets the phone
Thats all!!!!!!!!!!!!!!!
Samsung X100 Tricks

#*0000#
#*0400#
#*1200# - AFC DAC Val
#*1300# - IMEI
#*1400# - IMSI
#*1700# - ( ) Command #*1700 Executed
#*1800# - ( ) Command #*1800 Executed
#*1900# - ( ) Command #*1900 Executed
#*2000# - ( ) Command #*2000 Executed
#*2100# - ( ) Command #*2100 Executed
#*2200# - ( ) Command #*2200 Executed
#*2252# - Current CAL
#*2255# -
#*2256# - Calibr.-Info
#*2282#
#*2285#
#*2286# - Databattery
#*2337# - ( ) Permanent Registration - Not Yet Implemented
#*2355#
#*2400# - ( ) Command #*2400 Executed
#*2474# - For CMD Set - DEBUGBATTERY in cihard.opt
#*2527# - GPRS Switching Set to class {4/8/9/10}
#*2558# - Time ON
#*2562#
#*2565#
#*2677# - AMR State: {None / Full Rate}
#*2679# - Copycat Feature: {ACTIVATED/DEACTIVATED}
#*2787# - CRTP {ON/OFF}
#*2834# - Audio path Mobile Normal
#*2836# - AVDDSS Management: {DEACTIVATED/ACTIVATED}
#*3230# - Trace Enable DCD disable
#*3231# - Trace disable DCD Enable
#*3232# - Current Mode {Trace enabled/DCD enabled}
#*3270# - DCS Support: {DEACTIVATED/ACTIVATED}
#*3282# - Data: {DEACTIVATED/ACTIVATED}
#*3333#
#*3353# - General Defence Code Erased
#*3370#
#*3377#
#*3476# - EGSM: {DEACTIVATED/ACTIVATED}
#*3676# - Flash Volume Formated
#*3683#
#*3737# - Some Codes
#*3777#
#*3779#
#*3825# - ( ) Command #*3825 Executed
#*3837#
#*3849#
#*3851#
#*3876#
#*3877# - Dump of SPY Trace
#*3900#
#*3940# - External looptest 9600 bps not available in SYSOL2
#*3940# - External looptest 115200 bps not available in SYSOL2
#*3941#
#*4200#
#*4263# - Handsfree Mode: ACTIVATED
#*4300#
#*4500#
#*4674# - IMSI MCC:2 5 0 MNC 9 2 10 11 91 83 50
#*4700# - Half Rate: {ACTIVATED/DEACTIVATED}
#*4760# - GSM: {ACTIVATED/DEACTIVATED}
#*4864#
#*5100#
#*5111# - ( ) Some Codes
#*5132#
#*5133# - ( ) Some Codes
#*5143#
#*5156#
#*5165#
#*5171# - ( ) Some Codes
#*5172# - ( ) Some Codes
#*5173# - ( ) Some Codes
#*5174#
#*5175#
#*5176# - ( ) Some Codes
#*5177#
#*5187# - L1C2G trace: {ACTIVATED/DEACTIVATED}
#*53696# - [Java dnload] WAPSAR mode
#*536961# - WAPSAR enable HTTP disable
#*536962# - HTTP enable WAPSAR disable
#*536963# - SERIAL enable Others disable
#*5376#
#*5400# - ( ) Command #*5400 Executed
#*5500#
#*5600#
#*566335# - [WAP model ID]
#*5663351# - [Phone Model] SAMSUNG SGH-X100
#*5663352# - [Java Model] SEC-SGHS300/1.0
#*5737425# - Java Serial
#*577699# - APN
#*5800# - ( ) Command #*5800 Executed
#*6100# - ( ) Command #*6100 Executed
#*6200#
#*6420# - Mic off
#*6421# - Mic on
#*6422# - Mic dep RXdata
#*6428# - Mic measurement
#*6700#
#*6837# - Official Software Version
#*6900#
#*7200#
#*7222# - Operation Typ: Class C GSM
#*7224# - ERROR
#*7247#
#*7252# - Operation Typ: Class B GPRS
#*7271# - Multi slot: Class 1 GPRS
#*7274# - Multi slot: Class 4 GPRS
#*7276#
#*7284# - Class B
#*7287# - GPRS Attached
#*7288# - GPRS Detached
#*7326# - Accessory: Vibrator
#*7337# - Some kind of Reset Settings
#*7352# - Some Kind of Debug Info
#*7462# - SIM phase
#*7524# - KCGPRS
#*7562# - LOCI GPRS
#*7636#
#*7639#
#*7632# - Sleep mode
#*7633#
#*7638# - RLC always open ended TBF: {ACTIVATED/DEACTIVATED}
#*7646#
#*7665#
#*7666# - SrCell Data
#*7673# - Sleep mode
#*7676# - Command #*7676 Executed
#*7683# - Sleep variable
#*7693# - Sleep deact
#*7728# - RSAV done->reset
#*7763# - SMS bearer CS {ACTIVATED/DEACTIVATED}
#*7825#
#*7828# - Midl Rl51
#*7957# - Command #*7957 Executed
#*7983# - Voltage/Freq {DEACTIVATED/ACTIVATED}
#*7986# - Voltage {DEACTIVATED/ACTIVATED}
#*8462# - Sleep time since SwitchOff
#*8465# - Time in L1
#*8466# - Old Time
#*8645#
#*9278# - Command #*9278 Executed
#*9795# - wtls key: reset
#7263867# - RAM Dump {On/Off}
#7465625*228# - Activa lock deactivated
#7465625*27*
#7465625*2827# - Auto CP lock deactivated
#7465625*28638# - Auto Network lock deactivated
#7465625*28746# - Auto SIM lock deactivated
#7465625*2877# - Auto SP lock deactivated
#7465625*28782# - Auto subset lock deactivated
#7465625*638*
#7465625*746*
#7465625*77*
#7465625*782*
#8999*324#
*#0*
*#0020# –
*#06# – IMEI
*#2255# - Call List
*#4777*8665# – GPRS
*#7465625# – Interrogate ( )
*#8377466# – Software && Hardware Versions
*#8888# – Hardware Version
*#8999*324# - ( ) Some Strange Numbers
*#8999*377# -
*#8999*3825523# - ( )
*#8999*523# - Main LCD Brightness
*#8999*636# - ( ) Another Strange Numbers
*#8999*8376363# - . HW, SW, + Some Code And Data
*#8999*8378# - . , , , HW SW
*#9999# – Software Version

*2767*xx927 - WAP . xx - . , xx=44: *2767*44WAP# xx=31: *2767*31WAP#

*2767*xx667 - MMS.

*2767*2877368#
*2767*2878# – EEPROM ( , )
*2767*31667#
*2767*31927#
*2767*33667#
*2767*33927#
*2767*34667#
*2767*34927#
*2767*351667#
*2767*351927#
*2767*3700#
*2767*380667#
*2767*380927#
*2767*3855# - l EEPROM ( SP- !! ) IMEI 447967-89-400044-0, IMEI ( )
*2767*39667#
*2767*39927#
*2767*420667#
*2767*420927#
*2767*43667#
*2767*43927#
*2767*44667#
*2767*44927#
*2767*46667#
*2767*46927#
*2767*49667#
*2767*49927#
*2767*66335#
*2767*688# ( ) [Unlocking Code]
*2767*7100#
*2767*7300#
*2767*73738927# = *2767*RESETWAP#
*2767*7650#
*2767*7667#
*2767*7927#
*2767*8200#
*2767*927#
*335#
*663867# - mm file dumped
*7465625# -
*7465625*228# - Activa lock personalized
*7465625*27*
*7465625*2827# - Auto CP lock activated
*7465625*28638# - Auto Network lock activated
*7465625*28746# - Auto SIM lock activated
*7465625*2877# - Auto SP lock activated
*7465625*28782# - Auto subset lock activated
*7465625*638*
*7465625*746
*7465625*746*
*7465625*77*
*7465625*782*

Secret Codes

*#06# -> Show IMEI
*#9999# -> Show Software Version
*#0837# -> Show Software Version (instructions)
*#0001# -> Show Serial Parameters
*#9125# -> Activates the smiley when charging.

*#9998*228# -> Battery status (capacity, voltage, temperature)
*#9998*246# -> Program status
*#9998*289# -> Change Alarm Buzzer Frequency
*#9998*324# -> Debug screens
*#9998*364# -> Watchdog
*#9998*377# -> EEPROM Error Stack - Use side keys to select values. Cancel and ok.
*#9998*427# -> Trace Watchdog
*#9998*523# -> Change LCD contrast - Only with version G60RL01W
*#9998*544# -> Jig detect
*#9998*636# -> Memory status
*#9998*746# -> SIM File Size
*#9998*778# -> SIM Service Table
*#9998*785# -> RTK (Run Time Kernel) errors - if ok then phn is reset, info is put in memory error. *#9998*786# -> Run, Last UP, Last DOWN
*#9998*837# -> Software Version
*#9998*842# -> Test Vibrator - Flash the screenligth during 10 seconds and vibration activated.
*#9998*862# -> Vocoder Reg - Normal, Earphone or carkit can be selected
*#9998*872# -> Diag
*#9998*947# -> Reset On Fatal Error
*#9998*999# -> Last/Check

*#9998*9266# -> Yann debug screen (=Debug Screens?)
*#9998*9999# -> Software version

*0001*s*f*t# -> Changes serial parameters (s=?, f=0,1, t=0,1) (incomplete)
*0002*?# -> unknown
*0003*?# -> unknown

SP-unlock SGH-600 and SGH 2100

*2767*3855# -> Full EEPROM Reset ( THIS CODE REMOVES SP-LOCK!! )
But also changes IMEI to 447967-89-400044-0, To restore your old IMEI use the IMEI program found on the software page.

*2767*2878# -> Custom EEEPROM Reset

Tweet

Bieltv.3 RC5 (2.3)(CM7)









Lenox Evolution V2.2 (LF1)
NeoX BlackStar X3

Tweet

Globe collaborated with Facebook last year to offer its postpaid, prepaid, and TM subscribers access to the leading social networking site on mobile at zero data charges, alongside first-of-its-kind mobile innovations that address fear of mobile browsing, making the telco's Free Facebook offer a world-first.

With Free Facebook, you can connect with loved ones on your mobile for FREE until April 25, 2014.

Accessible on any internet-capable device: whether you are using a smartphone or feature phone, whether accessing via m.facebook or the Facebook app.
Worry-free surfing. Get notified if you're already leaving free Facebook.
1-click registration to Internet promos: Explore more of what's shared on Facebook, such as Youtube videos or website links, by subscribing to a PowerSurf promo. When you click on an external link on Facebook, it will recommend what promos are best for you based on your load balance & current promo MB balance.
3 Ways to Start Enjoying Facebook:

1. Dial *143# and choose FREE FB. Click the link in the SMS you'll receive.

2. Log on to m.facebook.com/free and click "Start now." If you don't have an account yet, creating one is free and easy at facebook.com/free. No email needed!

3. Launch the Facebook app on your mobile and click "Start now." You can start using free Facebook on your Facebook app, or web browser (m.facebook.com). You can use all Facebook official apps, including Facebook Messenger.

Free Facebook is only open to Globe postpaid, prepaid & TM subscribers. You only need a SIM and an internet-ready phone with Globe internet settings (Text GO to 2951 for free) and you're good to go!

Tweet

Recent report and research from Websense security research group, indicated that Windows systems used by consumers in the event of an error report, that if you submit an error report to Microsoft, then it would be very useful and may be intercepted by hackers, and based on this information to help formulate on relevant strategies of hacker attack. When the system crashes then it will pop up a dialog box, which contains detailed information on the operation status of the device, Windows version information, application information, and this information hackers are likely to be listening to.

When the system or application crashes then it pops up an error report, users often need to confirm whether it will pass these error messages to Microsoft, but at the time of transferring on some of the information often does not interact with the user. For example, the success of the new U-disk connection, information about the host and the Windows version number is being used, the service pack installation, BIOS information, and so on.

Although, when this data appear to leaked and no serious problem, but for a company who are the target of hackers, this information is very valuable, it can help hackers to aim their network test systems currently known vulnerabilities and weak points . Websense group noted: "Information generated due to a system crash is still very useful for hackers, and hackers might take to develop new zero-day vulnerabilities."

Source: neowin

Tweet

Rumors have broke though, but primarily focused in the greater will be equipped with touch screen and so on. And now, the latest disclosures from the micro-blog says, Apple iPhone 6 on the camera configuration will also have an improvements and will use F1.8 large aperture lens, which means that the machine can get better shots in low light conditions.

Or with F1.8 large aperture lens

Although smart phones way of winning is a good user experience and a lot of applications, but also the photographic effect or many mobile phone manufacturers attention. However, compared to other brands that are upgraded in terms of camera pixels, the Apple iPhone is focused on improving the CMOS pixel size and uses a larger aperture area of the lens. According to the latest revelations TD home Weibo user, said the future of the next generation iPhone will use F1.8 large aperture lens, which is compared to the current Apple iPhone 5s which were equipped with a F2.2 aperture lens, there's been a further improvement, so that the camera's ability to collect light is enhanced, thereby improving the performance of low-light photo shooting.

Still, it is confusing whether the next generation of iPhone will be upgraded to a million-pixel sensor level, but considering the present iPhone 5s camera pixel size has been increased to 1.5 microns, so do not rule out the next-generation iPhone is still with 800-megapixel camera  after all. Apple upgraded the hardware is not very keen, better photographic effect seems is the main direction of the next generation iPhone.

Body only 6mm thick

Since as additional changes in the next generation of the iPhone, the current rumor is equipped with a large 4.7 inches touch screen, and features a full metal body design. Meanwhile news from the industry chain is also disclosed that the next generation iPhone will be using the processor's 20nm manufacturing process, most likely A8 processor, but Apple won't rule out the existing of A7 processor to 20nm processor technology for  possible improvements.

Tweet

Las Vegas - CES 2014, Sony 's Kaz Hirai has just released a modern interactive dream concept interface - "Life Space UX". The intention is to eliminate the boundaries of products and technologies between families. "If you can not disappear together, then across the traditional boundaries in science and technology with the family will be on this transition." Hirai says. In the demo, Hirai shows both sides of a window can be used as a display screen. "Imagine the impact of having a browsing experience, watch live sports on how wonderful it would be so much like a window screen." He explained.

Although the concept of this product is futuristic - but this product also has considerable practical significance. Sony will be officially released the first commercial on this product in the summer - Ultra Short Throw Projector. This is a close-up of the projector, priced from $ 30,000 to $ 40,000 can be filled with 147 inches of the wall, this projector can play 4k on a wall in your own home with HD resolution images, while the built-in dual speakers can provide users with a home theater-like experience. Meanwhile, the device is equipped with a distance sensor allows the user to interact with the interface, therein a common table can be transformed into a smart device having a touch screen. Such devices are also consistent with the objectives of Sony: Let household electronic devices become more interesting. "Home electronic devices should be able to feel our activities on smart devices," Hirai said. "For the consumer appliances in market position and letting the user experience, and which I am positive."

via: theverge

Tweet

From the Blog-Revolution-HD, broke the news Jan 1, 2014 and published on HTC latest details M8 details. That includes a 4.9 inches 1920 × 1080 pixel full HD display, Qualcomm Snapdragon 800 processor, 2GB of memory to run, fingerprint recognition and 4000 mA battery capacity so configured. However, the well-known XDA team members Mike1986 recently said, HTC M8 will eventually be named HTC One +, and announced a new version on this model configuration.

According Mike1986, HTC One+ will be equipped with a Full HD Gorilla Glass 3 display, 1920 × 1080 pixels resolution 5-inch full HD display. Will also be equipped with a quad-core Qualcomm Snapdragon 805 processor, 2GB LPDDR3 memory to run, 6,000,000 or 8,000,000 pixels Ultra Pixel camera and 2.1 megapixel front camera. Another HTC One + will be equipped with a 2900 mA battery capacity, support for microSD card expansion and NFC capabilities. Compared to the HTC One, HTC One+ headroom isn't that great, but its processor, battery capacity, screen size has an excellent change.

HTC One+ operating system will go with the flow of the latest Android KitKat with HTC Sense™ 6.0. Another very interesting and the content is learned that HTC One+ don't have any physical buttons, all are manipulated through the screen to interact with the Android system is complete, just like Google Nexus 4 and Nexus 5.

Because this device is an upgraded version of HTC One, there's not much difference on the appearance. But now, it is all still in the rumor stage. Currently outside forecasts, HTC One+ will be officially unveiled at MWC Mobile World Congress February 24 to 27 in Barcelona.

Tweet

For this year events, consumers are looking forward to see the new products of this coming CES 2014 in which new gadgets will be unveiled. And one of it's rumored leaked that what many have been waiting for is the release of Samsung company the Samsung Galaxy S5.

Product Description: Samsung GALAXY S5 may use a 5.2-inch Super AMOLED UHD display, screen resolution 1920 × 1080 pixels. The aircraft is equipped with Exynos6 or processor clocked at 1.5GHz of the ARM CortexA15 a quad-core processor, clocked at 1.2GHz, ARM CortexA9 a quad-core processor and a dual-core processor clocked at 1.7GHz components. Samsung Galaxy S5 concept is equipped with a 16 megapixel main camera and a 2.5-megapixel front-facing camera, with LED flash and BSICMOS sensor and built-in 3GB RAM and 16GB/32GB/64GB ROM, also has a 3100mAh battery, Run Android 5.0 operating system. Specs via : here

Samsung GALAXY S5 Scheduled to be unveiled on February 2014

VP and Chief Designer Zheng Dongxun

A news from the VP and Chief Designer Zheng Dongxun stated that the released date of Samsung Galaxy S5 will be officially unveiled and moving it's schedule on February 2014 for the event MWC2014 in which he told the reporters while attending a  New Years party at the Seoul Shilla Hotel. In addition, Samsung GALAXY S5 will probably be using the new material, they may even feature curved screen.

Samsung GALAXY F

As for the detailed specifications of the new product Samsung GALAXY S5, has not yet been cleared, but we had learned the news, and perhaps also in the process of Samsung GALAXY F in the new series of research and development. It is reported that the Samsung GALAXY F will serve as the new Samsung GALAXY series flagship product, the biggest change is that in one fell swoop to bid farewell to the traditional plastic instead of metal body design.

Tweet

It has been rumored that Meizu could launch an Ubuntu powered Meizu MX3 at CES, although this hasn’t happened yet, leaks here in China suggest it still could happen!

Further leaked photos about the collaboration with Canonical Meizu to fabricate first Ubuntu Touch Smartphone. This time showing the Meizu MX3 running Ubuntu and clearly identified with labels stating the phone is ‘Ubuntu Certifiied’. Last December, Canonical CEO, Mark Shuttleworth, told CNET that high-end Ubuntu smartphones made by an "unnamed maker" will appear this year. More specifically, the source says that Weibo Li Nan, VP of Meizu, that the coming months we will see Ubuntu Touch Phone from the company.

From Phonearena: "Back in December, the Chinese maker was alleged to appear at this year's CES, and it's actually there."

Source: Link